{"id":3240,"date":"2021-02-23T15:00:00","date_gmt":"2021-02-23T06:00:00","guid":{"rendered":"https:\/\/www.naccorporation.com\/en\/learning-center\/video-contents\/3240"},"modified":"2022-10-31T13:53:41","modified_gmt":"2022-10-31T04:53:41","slug":"operation-of-md-analyzer-for-moment-disconnection-testing-for-nms10","status":"publish","type":"video-contents","link":"https:\/\/www.naccorporation.com\/en\/learning-center\/video-contents\/3240","title":{"rendered":"Operation of MD analyzer for Moment Disconnection Testing (for NMS10)"},"content":{"rendered":"
\r\n
\r\n

Text and images from this video<\/h2>\r\n\r\n
\r\n

Setting<\/h3>\r\n

\r\nPrepare Harness NMS10 and \"MD analyzer\" installed on the PC. <\/br>\r\nTurn on the tester and connect to the PC with PC cable.<\/br>\r\nStart the software.<\/br>\r\nNon-connection is displayed.<\/br>\r\nYou need to set the com port.<\/br>\r\n<\/br>\r\nInput default Manager ID ,nacman790.<\/br>\r\nPlease open the Setting.<\/br>\r\nSet COM port. If the tester is connected to PC, the COM Port will be displayed.<\/br>\r\nIf it is not displayed, the tester is not connected properly. <\/br>\r\nPlease check the PC cable or the Software driver install.<\/br>\r\nAfter setting the COM, Please go back to MENU.<\/br>\r\nThe tester name will be displayed in a few seconds.<\/br>\r\nThen the connection is completed.<\/br>\r\n\r\nThere are two types of login. Checker, and Manager.<\/br>\r\nThe checker can operate only parts for testing.<\/br>\r\nThe Manager can operate all functions of this software including creating test data and management of test reports.<\/br>\r\nIf you log in, the buttons will be active depending on the login type.<\/br><\/br>\r\n\r\nLet's check the Setting again.<\/br>\r\nIn setting, you can set the default test specification, test setting and ID registration.<\/br>\r\n\r\n<\/p><\/br>\r\n

\r\n\"Connecting<\/br>\r\n<\/div>\r\n\"Setting\r\n<\/div>\r\n
\r\n<\/hr>\r\n\r\n
\r\n

Data Management<\/h3>\r\n

Let's create test data.<\/br>\r\nPlease open Data Management.<\/br>\r\nClick \"create new data\".<\/br>\r\nInput the product name and comment.<\/br>\r\nThe comment is available for the test instructions.<\/br>\r\n\r\nPlease set the test channels, test specs, and settings.<\/br>\r\nThe inspection time can be set to 999 hours, 59 minutes, and 59 seconds.<\/br>\r\n\r\nYou can set the stop setting.<\/br>\r\nThis is used to set the test stop setting when momentary disconnections occur.<\/br>\r\nThe default setting is Continue.<\/br>\r\nThe momentary disconnection detection width can be set from 0.1 microseconds to 99.9 microseconds.<\/br>\r\nIf a momentary disconnection occurs, the tester continues to test for the specified time.<\/br>\r\n<\/br>\r\n\r\nIf you finish them, Please press ENTER to complete creating test data.<\/br>\r\nOf course, you can re-edit the data.<\/br>\r\n<\/p><\/br>\r\n\"Setting\r\n<\/div>\r\n

\r\n<\/hr>\r\n\r\n\r\n
\r\n

Test<\/h3>\r\n

\r\nYou can test with the test data.<\/br>\r\nPlease select the test data.<\/br><\/br>\r\n\r\nThis is the test screen.<\/br>\r\nIf you click start, the test will run.<\/br>\r\n\r\nThe continuity of each channel is displayed.<\/br>\r\nThe test was completed and passed.<\/br>\r\nIf no disconnection occurs, it will show \"PASS\".<\/br>\r\nLet\u2019s check the case of the momentary disconnections detected.<\/br>\r\nThe momentary disconnections are shown in the graph like this.<\/br><\/br>\r\n\r\nAll channels are always monitored at the same time.<\/br>\r\nIt finishes at the specified time and makes the judgment.<\/br>\r\nYou can click the graph and analyze the phenomenon.<\/br>\r\n\r\n<\/p><\/br>\r\n

\r\n\"The\r\n<\/div>graph \r\n\"Analyzing\r\n<\/div>\r\n
\r\n<\/hr>\r\n\r\n
\r\n

Test Report<\/h3>\r\n

All test reports are saved by each test.<\/br>\r\nAnd you can play back the test as the graph to analyze the events.<\/br>\r\n<\/br>\r\nPlease decide the condition and click enter.<\/br>\r\nSelect the test report and click DETAIL.<\/br>\r\nSelect the line and click the test data. The test report will be written out.<\/br>\r\nOpen the test report.<\/br>\r\nIt contains information about the date and time, the test spec, the measured value, and the result.<\/br>\r\nFor the daily check,please conduct it.<\/p><\/br>\r\n

\r\n\"Playback\r\n<\/div>\r\n\"Report\r\n<\/div>\r\n
\r\n<\/hr>\r\n
\r\n

Self-Diagnosis<\/h3>\r\n

\r\nSelf-diagnosis is the function to check the tester before testing.<\/br>\r\nFor the daily check, please conduct it.<\/br>\r\nRemove all test cables from the tester connectors before click start.<\/br>\r\n\r\nIt shows \"pass\".The tester is normal.<\/br>\r\nIf NG occurs, please check your environments.<\/br>\r\nPlease contact us in case of tester failure.<\/p><\/br>\r\n\r\n\"Self-Diagnosis\r\n<\/div>\r\n

\r\n<\/hr>\r\n\r\n\r\n
Watch More Videos<\/a><\/div>\r\n\r\n","protected":false},"author":1,"featured_media":3241,"menu_order":62,"template":"","meta":[],"video-cat":[152],"video-tag":[145],"aioseo_notices":[],"aioseo_head":"\n\t\t\n\t\n\t\n\t\n\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t